Introduction
The Importance of a Functioning Elevation Knob
The Burris Veracity riflescope is a popular choice among hunters and shooters, renowned for its quality optics, rugged construction, and user-friendly features. A critical component of this scope, and indeed any quality riflescope, is the elevation knob. This dial, often referred to as the “elevation turret,” plays a crucial role in compensating for bullet drop at varying distances, ensuring accurate shots at extended ranges. Imagine the frustration, then, when this vital piece of equipment malfunctions, rendering your scope’s ability to adjust for distance unreliable. This article delves into the frustrating issue of the Burris Veracity PH elevation knob not resetting properly, providing a comprehensive guide to troubleshooting and solutions for this common problem.
Why This Matters
The ability to accurately adjust your scope’s elevation is paramount to successful shooting. The elevation knob is what you manipulate to compensate for the effects of gravity on your bullet’s trajectory. As the distance to your target increases, the bullet will drop further. The elevation knob allows you to “dial in” the necessary adjustments to counteract this drop, ensuring your bullet impacts where you aim. The knob’s markings, often in MOA (Minutes of Angle) or MRAD (Milliradians), allow you to make precise adjustments based on your range and ballistics information.
The Veracity and the PH Feature
The Veracity often incorporates a PH (parallax/elevation) knob, designed to make shooting more precise. When set up correctly, you can dial the PH knob to account for the distance to your target, and the reticle will stay on your intended point of impact. A critical aspect of this system is the ability to reset the elevation knob, often to a “zero” or a pre-determined setting, after making adjustments. This reset feature is important for quickly returning to your original zero and making future adjustments based on that zero. Therefore, when the *Burris Veracity PH elevation knob not resetting*, it creates a real problem.
Understanding the Problem
The Core Issue
The inability of the *Burris Veracity PH elevation knob not resetting* can stem from various causes, ranging from simple user error to more complex mechanical issues. Identifying the root cause is the first step towards resolving the problem.
Common Causes
Mechanical Problems
One of the more frequent issues behind the *Burris Veracity PH elevation knob not resetting* revolves around the mechanics of the scope itself. Sometimes, this is the result of over-tightening the knob during previous adjustments. This can bind the internal components and prevent the knob from freely rotating or returning to its zero position. Also, any debris, dirt, or even small particles of dried grease that might have worked its way into the mechanism could act as an obstruction, blocking the knob from its correct movement. Damage to the inner components – gears, springs, or other parts that facilitate elevation adjustments – is another plausible cause, and that could potentially result from misuse, impact, or simply wear and tear over time. Improper reassembly of the knob and its internals following maintenance or an attempt to disassemble it is another possibility. Finally, while the Veracity scope is known for durability, a significant impact, such as a drop, can misalign or damage these sensitive internal mechanisms.
User Errors
User error, too, accounts for many instances of the *Burris Veracity PH elevation knob not resetting*. One of the most common mistakes is forgetting to loosen the reset mechanism. Many scopes have a lock or set screw that must be released before the knob can be reset. Failing to loosen this mechanism will prevent the knob from turning freely. Another reason may be a lack of familiarity with the reset process itself. Each riflescope has a unique method, and not knowing the specific procedure can lead to frustration and the perceived malfunction. Carefully reading the owner’s manual is the best starting point for determining the correct reset procedure for your particular model.
Manufacturing Defects
Although less common, manufacturing defects could be a contributing factor to a *Burris Veracity PH elevation knob not resetting*. While Burris is typically recognized for the quality of its products, there’s always a remote possibility of inherent flaws in the scope’s design or manufacturing, potentially leading to the issue. QC (Quality Control) failings can also inadvertently lead to scopes with issues, and again, this is uncommon but can happen.
Troubleshooting Steps and Solutions
A Step-by-Step Guide
Begin with a thorough visual inspection. Examine the knob itself, paying close attention for any obvious signs of damage or obstruction. Look for dents, cracks, or anything that could be preventing the knob from moving freely. Carefully inspect the reset mechanism (if one is present), such as a small set screw or a push-and-turn system, to make sure that it is working correctly. Check that it moves and releases the knob.
Carefully, and with patience, verify if the issue might be user-caused. Reference the owner’s manual of your particular Burris Veracity model. This document describes the elevation knob’s functionality and details the correct method to reset it. Following the correct procedures described in the manual, make sure that you are loosening (if applicable) the set screw, or other locking mechanism, before attempting to reset the knob to zero. Ensure you’re not inadvertently applying too much force. The key is to follow the manufacturer’s instructions precisely.
Sometimes, the solution is as simple as loosening and retightening the knob. Loosen the elevation knob slightly. Then, attempt to reset it. If the knob moves freely, tighten it again and verify whether the reset is working. It is often the simplest solutions that solve problems!
If the problem continues, consider the possible presence of dirt, dust, or debris within the knob mechanism. Carefully clean the knob and the immediate surrounding area, removing any visible contaminants. Use compressed air to blow out any loose particles. For more thorough cleaning, and if you feel comfortable, you can attempt to clean the inside of the knob, but **exercise EXTREME CAUTION**. Use appropriate tools, and be careful not to damage any internal components. A soft brush or cotton swabs can be used to carefully remove debris. Take pictures before you begin this process, to help reassembly.
If the previous steps have not corrected the problem, and if you have experience in scope repair or have the necessary confidence and expertise, you might consider adjusting the internal components. **However, THIS IS HIGHLY DISCOURAGED UNLESS YOU ARE EXPERIENCED WITH SCOPE REPAIR, and are comfortable with your mechanical aptitude.** This procedure could easily void the warranty on your Burris Veracity. If you decide to proceed, the owner’s manual and any available diagrams should be consulted, and every step must be documented. The procedure will vary based on the specific design of your Veracity model, and this is a good reason to seek expert help. The key is to identify and correct any misalignment or obstruction within the mechanism.
Tools Needed
Remember that specific tools, such as the correct size screwdrivers, and cleaning supplies, like compressed air and lens cleaner, may be needed.
Safety First
Safety is paramount when working with any optical device. Handle the scope with care, avoid applying excessive force, and ensure that you are working in a well-lit area. The risk of voiding the warranty is very real, so be aware.
When to Seek Professional Help
It’s important to know when it’s time to seek professional help rather than trying to fix the *Burris Veracity PH elevation knob not resetting* yourself. If, despite your efforts, the knob continues to malfunction, it’s best to contact Burris customer service or a qualified gunsmith. If your scope is still under warranty, contacting Burris is the best course of action. They can assess the problem and provide a repair or replacement.
If you are not comfortable with adjusting the internal components, it is crucial to seek professional help. A qualified gunsmith or repair technician will have the expertise, tools, and parts to diagnose and fix the problem.
Getting in Touch
You can find contact information for Burris on their official website. They offer customer support through phone, email, and online chat. The advantage of seeking professional help is the peace of mind that comes from knowing the problem will be addressed correctly.
Prevention and Maintenance
Proper Mounting
Preventing the *Burris Veracity PH elevation knob not resetting* from occurring in the first place can save you time and frustration. Proper mounting of your scope is crucial. Ensure the scope is mounted correctly, and that all mounting hardware is tightened to the correct torque specifications. Improper mounting can stress the scope’s internals and lead to problems.
Regular Cleaning
Regular cleaning is also key. Keep the scope clean and free from dirt, dust, and debris. Use a soft cloth and lens cleaner to clean the lenses regularly, and avoid using harsh chemicals.
Proper Storage
Proper storage will also prevent the problem. Store your scope in a protected environment away from extreme temperatures, humidity, and direct sunlight. This will help preserve the scope’s internal components and prolong its lifespan.
Avoiding Over-Tightening
Finally, avoid over-tightening the elevation knob during adjustments. Apply only the force needed to make the necessary changes. Over-tightening can damage the internal mechanisms and make the knob difficult to reset.
Conclusion
The *Burris Veracity PH elevation knob not resetting* can be a frustrating problem, but with a systematic approach, it can often be resolved. By understanding the causes, following the troubleshooting steps, and knowing when to seek professional help, you can restore the functionality of your scope and get back to accurate shooting. Remember to prioritize safety and proceed with caution, and you will be well on your way to solving your problem.
